I. the product right out of the box and check
Before unpacking be sure to determine the following
1. this printer particularly used for environmental protection recycle cartons, looking at shipping carton found no spare fault please report directly to the carrier
2. contains the printer face up
3. before filling out the printer carefully remove
4. keep the printer on a flat firm surface and check for any damage resulting from transportation
5. beyond anything that would result in damage to
6. check items against the packing list are complete
II. hardware installation
1. Please refer to the operation manual to install Ribbon
2. Please refer to the operation manual for installing the paper roll
3. Please refer to the operation manual connecting power and data cables
III. software installation
1. Insert the disc at random, reference drivers installed, install the driver
2. install your choice of label editing software, please note that when label editing software is being installed make sure that support this printer
3. the printer Panel settings please refer to the document Panel operation
4. PC-side software used please refer to the user manual of the software, is installed, you can use this power on the printer
IV. WINDOWS driver installation
Before installation, note the following
1. check driver
2. backup the drivers
3. read the README.TXT document for this driver (for example, CD windowsdriver/dr200readme.txt)
4. Enter WINDOWS
5. Insert CD, CD autorun, please exit the Autorun interface
6. under the system is WIN95/98/NT4.0/2000 the installation procedure:
7. click the "start";
8. Select "settings", then "printers"
9. double-click the "add new printer" dialog box appears, click the "next" button
10. Select "network printer" or "local printer" and click "next" button
11. Select "install disk", enter the full path to the driver files, such as f:\windowsdriver\dr200\win2000
V. important safety and other considerations
1. Please read the safety instructions and precautions
2. the printer through the FCC, part 15, class a, interference when using radio, television and other communication products, so be sure to remove these products so as to avoid jamming
3. Requests – place the printer on a level, sturdy desk or flat surface
4. place away from moisture, water and heat
5. Please refer to the specification label of the back panel of the printer, power specifications to determine if your use is correct, users do not notice: ensure that the power supply voltage switch (110V/230V) agree with the supply voltage in your area, otherwise it will cause the machine to burn down or not functioning properly.
6. when the machine is connected to the power supply, do not open the case
7. prohibited non-professionals working inside the printer
8. before cleaning the printer, be sure to power off the printer, do not use liquid or spray cleaner to clean the printer, gently wipe with a soft cloth or cotton printers
9. at room temperature for more than 40 degrees Celsius is strictly prohibited to use the printer, this may damage the printer
10. the cooling vents around the printer should avoid being blocked, affecting heat
11. the power cord of the printer should be put in a safe place, identify the voltages and currents can carry the power cable should be greater than the printer is identified by the voltage and current
12. any cooling vents of liquid drops into the printer, so as not to cause a fire or short circuit
13. If the printer is not often used, disconnect the printer from the host connection and power cables, in order to avoid transient voltage overload damage to the printer